Almost every new tank and pod kit now ships with a mesh coil. But what is the difference between mesh and a standard wire coil, and is it worth switching? This guide explains how each type works, the pros and cons, and how to pick the right resistance for your kit.
What is a mesh coil?
A standard coil uses a round wire wound into a spiral. A mesh coil uses a flat strip or sheet of metal mesh instead. The mesh has a much larger surface touching the cotton, so it heats more evenly and more e-liquid is vaporised at once.
Mesh vs standard coils at a glance
| Mesh coil | Standard wire coil | |
|---|---|---|
| Heat-up | Fast and even | Can take a moment; hot spots possible |
| Flavour | Usually fuller and more consistent | Good, but can fade sooner |
| Vapour | More vapour at the same power | Less vapour |
| E-liquid use | Higher | Lower |
| Battery use | Higher on sub-ohm coils | Lower |
| Lifespan | Often longer, as heat is spread out | Varies with liquid and power |
Which resistance should I choose?
- 0.8 ohm and above (MTL): a tighter, cigarette-style draw. Best with nic salts or higher-strength freebase.
- 0.4 to 0.6 ohm (restricted DL): a looser draw with more vapour. Works with lower-strength liquids.
- Below 0.3 ohm (sub-ohm DL): big clouds at higher wattage. Use 3mg or 6mg shortfills or freebase, never 20mg nic salt.
Always stay within the wattage range printed on the coil or its box.
Does my kit take mesh coils?
Coils are made for specific tanks or pods, so a mesh coil only fits if it is from your tank’s coil family. Many families include both mesh and standard versions, for example SMOK RPM and Geekvape M and Z series. Check our guide on which coil fits my vape kit before you buy.
Getting the best from a mesh coil
- Prime it. Drip a few drops on the cotton, fill the tank and wait five to ten minutes. See how to change and prime a coil.
- Start low. Begin at the bottom of the wattage range and work up.
- Keep it topped up. Mesh uses liquid quickly, so do not let the tank run nearly dry.
- Watch sweet liquids. Very sweet e-liquids gunk coils faster.
Frequently asked questions
Do mesh coils last longer?
Often, yes, because the heat is spread over a larger area. Your liquid, wattage and how much you vape still matter most.
Why does my mesh coil taste burnt?
Usually because it was not primed, the wattage is too high, or the tank ran low. Replace it if the taste stays.
Can I use nic salts with a mesh coil?
Yes, with mesh coils rated 0.8 ohm or higher on low power. Avoid nic salts on sub-ohm mesh coils.
Vapes Direct Wholesale sells to adults aged 18 and over only. Vaping products containing nicotine are not for use by non-smokers. This product contains nicotine which is a highly addictive substance.
Leave a Reply